2010 - Volume #34, Issue #6, Page #38
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
How To Remove Spot Welds Fast
The Blair Premium spotweld cutter consists of an arbor with a pilot on it that helps line up the hole, and a cutter that screws onto the arbor. The cutters look somewhat like a drill bit except they're hollow and have teeth with multiple angles on them. Both the pilot and cutter are replaceable, and different size cutters and pilots are available.
"It works somewhat like a hole saw, only it works much better. It's almost like having a hole saw on steroids," says Greg Londrigan, Blair Equipment Co., Flint, Mich. "It works great for car restoration or auto body repair work, where you want to remove spotwelds from body panels. You can also use it to drill plug holes, where you drill a hole through one piece of sheet metal and then lay another piece on top of it and then weld in that hole."
Premium spotweld cutters are available individually ($27.95 plus S&H) or in kits with 3 cutters ($46.35 plus S&H) or 7 different sizes of cutters from 5/16 to 3/4 in. in dia. ($84 plus S&H).
Contact: FARM SHOW Followup, Blair Equipment Co., P.O. Box 2005, Flint, Mich. 48501 (ph 810 635-7111; info@blairequipment.com; www.blairequipment.com).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.