3-Pt. Mounted Forklift Made From Truck Springs
 ✖  |
Trent Sexton, Anchorage, Alaska, built this 3-pt. mounted forklift for his Ford tractor, using a pair of springs off the front end of a Kenworth T 800 semi tractor. The springs are welded to a length of box tubing that pins onto the 3-pt. lift arms.
Trent and his wife Christine use the forklift mainly to haul firewood. "It has a capacity of 800 lbs. and can handle loads heavy enough to lift the front end of the tractor off the ground," notes Trent.
Contact: FARM SHOW Followup, Trent and Christine Sexton, P.O. Box 143433, Anchorage, Alaska 99514 (ph 907 748-4341).
Click here to download page story appeared in.
Click here to read entire issue
3-Pt Mounted Forklift Made From Truck Springs MISCELLANEOUS EQUIPMENT Forklifts Trent Sexton Anchorage Alaska built this 3-pt mounted forklift for his Ford tractor using a pair of springs off the front end of a Kenworth T 800 semi tractor The springs are welded to a length of box tubing that pins onto the 3-pt lift arms Trent and his wife Christine use the forklift mainly to haul firewood It has a capacity of 800 lbs and can handle loads heavy enough to lift the front end of the tractor off the ground notes Trent Contact: FARM SHOW Followup Trent and Christine Sexton P O Box 143433 Anchorage Alaska 99514 ph 907 748-4341
To read the rest of this story, download this issue below or click
here to register with your account number.
