Deck Screw Placed Into 3/8-in. Electric Drill
 ✖  |
Myron Finch, 315 S. High St., Baxter, Iowa 50028: "My 3-wheeled bicycle had been outside for too long, which caused the bike's chrome wheel rims and fenders to become rusty. Steel wool worked to clean the rust but it was a slow process.
"To speed things up, I cut the point and head off a 3 1/2-in. deck screw and placed it into a 3/8-in. electric drill. Then I wound up some steel wool around the screw. Using the drill to clean the rust off this way works great, especially around the wheel spokes. When I got done I waxed the chrome with chrome sealer that I bought at a hardware store."
Click here to download page story appeared in.
Click here to read entire issue
Deck Screw Placed Into 3/8-in. Electric Drill FARM SHOP Miscellaneous 34-5-37 Myron Finch, 315 S. High St., Baxter, Iowa 50028: "My 3-wheeled bicycle had been outside for too long, which caused the bike's chrome wheel rims and fenders to become rusty. Steel wool worked to clean the rust but it was a slow process.
"To speed things up, I cut the point and head off a 3 1/2-in. deck screw and placed it into a 3/8-in. electric drill. Then I wound up some steel wool around the screw. Using the drill to clean the rust off this way works great, especially around the wheel spokes. When I got done I waxed the chrome with chrome sealer that I bought at a hardware store."
To read the rest of this story, download this issue below or click
here to register with your account number.
