2010 - Volume #BFS, Issue #10, Page #114[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story ]
Waynes Tile Pro Offers Quick-Tach Receiver Bracket For Fast, Easy Hookup
A new quick-tach receiver bracket provides easy hookup in 10 to 15 min. using a hitch pin and C-clips to mount the Tile Pro to your tractor. Using the quick-tach bracket to hook up to the frame of the tractor¨and not the 3-point hitch¨gives the Tile Pro better stability for grade than a standard pull-type plow. Mounting the Tile Pro into your hitch and the quick-tach bracket, mounted high on your tractor, increases traction by the even trasfer of weight to the front and rear of your tractor. It also allows for increased maneuverability because there are no tires to move around or back over the starting point as with a pull-type. The side of the low angle knife is lined with stainless steel for less resistance and drag as it opens the ground to allow the boot to glide through to accurately place the tile.
By pulling a single full-length removable rod you can quickly interchange tile boots from 3, 4, 5, 6, 8, or 10-in.
Ask us about the cost comparison chart. Call Wayne's at 507-249-3176 for more information or visit:
Click here to download page story appeared in.
To read the rest of this story, download this issue below or click here to register with your account number.