2010 - Volume #BFS, Issue #10, Page #56[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story ]
Add-On Power Steering Kits
Specifically Jackson specializes in the following tractors:
Ford 8N, Jubilee/NAA, 600 Series, 800 Series, 1000 Series and the Ford Industrial tractors
International Harvester 300, 330 and 350 Utility and Farmall tractors, and the H and M Farmalls.
Oliver Super 55 and 550 tractors
John Deere 750, 850, 950 and 1050 compact tractors.
"In addition, says Jackson, "We are always looking for different makes and models of tractors to build steering for. In the past, we have had customers bring their tractors to us from as far away as New York State. "
Jackson Power Steering offers two types of power steering. One is Hydrostatic Power Steering; the other is the Torque Generator type.
The Torque Generator type of steering is a unit that is spliced into the steering shaft. Actually, it is a directional control valve combined with a motor to assist turning the steering shaft going to the steering gear box. It provides very good steering in those applications where one has 9 in. of steering shaft space to fit the unit into. The Torque Generator is not meant to be installed on vehicles going over 20 MPH.
The Hydrostatic power steering will upgrade the steering on your tractor to equal the steering ease of a car. There will be no mechanical link between the tractor's steering wheel and the front wheels. Therefore you will not have to spend the money to restore the tractor's steering gear box. In tractors where the internal tractor hydraulics is not sufficient to power the steering, a front-mounted loader pump is used, on tractors fitted with a loader.
To install the unit, you simply remove your tractor's original steering wheel, steering column, and steering worm gear. All those original parts can be placed in a storage box and stored away in case you want to go back original some day. The steering unit would mount on the top of your present steering gear box, with its own steering wheel, steering column steering control unit and bracket. Once installed, it is hard to see the steering control unit since it looks factory.
The steering unit uses a priority flow valve to divide the flow, giving the steering unit all the fluid it wants, and then sending the rest to the 3-pt. hitch and loader. This gives you effortless steering regardless of the load on the loader or the speed of the engine.
The steering unit is built so anyone can install it using standard tools. Excellent instructions with lots of pictures are provided. In addition, factory help is as close as the phone if the customer has questions.
There is much more information, regarding the steering unit, at the Jackson website: www.jacksonpowersteering.com
Included are customer testimonials, pictures, video, and a section of questions and answers about the steering unit.
Contact: FARM SHOW Followup, Jackson Power Steering, 17321 NW V Road, Jetmore , Kansas 67854 (ph 620-357-6546email: sales@jacksonpowersteering).com.
Click here to download page story appeared in.
To read the rest of this story, download this issue below or click here to register with your account number.