2010 - Volume #BFS, Issue #10, Page #45[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story ]
"Plug-Proof" MudSmith Gauge Wheels
"We were under our corn planters and drills hundreds of times taking gauge wheels off and cleaning them out when we needed to be planting," recalls Roger Smith. "When conditions are bad, you have to do it again and again."
Smith points out that earlier planting dates and reduced tillage have added to the problem. Their new design with its open spokes dramatcally reduces the problem. It also opens up both access and visibility to disc opener hubs and scrapers.
"We've been running them on our own equipment for 3 1/2 years," he says. "We were surprised how well they worked. We've had no more issues with plugging. They're a huge improvement over the original equipment. We designed them so you can use standard bearings and tires from your dealer."
The MudSmith units feature a cast iron hub and simplified bearing replacement. Smith notes that original equipment gauge wheels require removing the tires, splitting the rim, and removing bolts to get at the bearing.
"With the MudSmith, you just remove the snap ring and replace the bearing," says Smith. "We didn't intend to sell them when we first made them for ourselves, but the response has been terrific."
MudSmith gauge wheels are available in 3-spoke/4-in. tire, 3-spoke/2 1/2-in. tire, and 4-spoke/4-in. tire. Prices start at $125 for the hub and rim assembly. The completely assembled wheel ready to bolt on the planter is priced at $165. Special through Dec.31, 2009, 3 percent cash discount.
Contact: FARM SHOW Followup, MudSmith, LLC, P.O. Box 83, Hazel, S. Dak. 57242 (ph 605 520-0617 or 605 881-4214; fax 866 593-6406; www.the mudsmith.com).
Click here to download page story appeared in.
To read the rest of this story, download this issue below or click here to register with your account number.