How To Hold Hammer And Ax Heads In Place
 ✖  |
To hold hammer and ax heads in place I drill a small hole through the center of the head, then place a nail through the hole and cut it off about 1/8 in. on the opposite side. Then I place the nail head on a vise or anvil and use a ball peen hammer to flatten the end of the nail like a rivet. (Leonard Seltzer, 16040 W. Elmwood, Manhattan, Ill. 60442 (ph 815 478-3578)
Click here to download page story appeared in.
Click here to read entire issue
How To Hold Hammer And Ax Heads In Place FARM SHOP Handy Hints 33-4-41 To hold hammer and ax heads in place I drill a small hole through the center of the head, then place a nail through the hole and cut it off about 1/8 in. on the opposite side. Then I place the nail head on a vise or anvil and use a ball peen hammer to flatten the end of the nail like a rivet. (Leonard Seltzer, 16040 W. Elmwood, Manhattan, Ill. 60442 (ph 815 478-3578)
To read the rest of this story, download this issue below or click
here to register with your account number.
