Handy Hint For Bending Fence Wire
 ✖  |
Dean Larson, Tescott, Kan.: "I recently put up some fencing using 5 by 100-ft. rolls of 6 by 6-in. wire. It looks much like concrete reinforcing wire but is heavier gauge and galvanized. To bend the wire around itself I used a homemade metal tool that's about 6 in. long by 1 in. wide by 1/4 in. thick, with three holes in it. My homemade tool works a lot better than pliers for bending such wire."
Click here to download page story appeared in.
Click here to read entire issue
Handy Hint For Bending Fence Wire FARM SHOP Handy Hints 33-4-37 Dean Larson, Tescott, Kan.: "I recently put up some fencing using 5 by 100-ft. rolls of 6 by 6-in. wire. It looks much like concrete reinforcing wire but is heavier gauge and galvanized. To bend the wire around itself I used a homemade metal tool that's about 6 in. long by 1 in. wide by 1/4 in. thick, with three holes in it. My homemade tool works a lot better than pliers for bending such wire."
To read the rest of this story, download this issue below or click
here to register with your account number.
