He Solved Problem With Cord Advance On Weed Eater
 ✖  |
Gordon Fuller, Barriere, B.C. ph 250 672-0167; grfuller@uniserve.com: "The cord advance on my Weed Eater was always a hassle to operate. To solve the problem, I removed the spool and drilled two small holes about 1/2 in. apart, then threaded the cord through them as shown. I've made this modification for several friends, using different sizes and lengths of cord. Usually I use a cord that's 16 to 20 in. long."
Click here to download page story appeared in.
Click here to read entire issue
He Solved Problem With Cord Advance On Weed Eater FARM SHOP Handy Hints 32-5-37 Gordon Fuller, Barriere, B.C. ph 250 672-0167; grfuller@uniserve.com: "The cord advance on my Weed Eater was always a hassle to operate. To solve the problem, I removed the spool and drilled two small holes about 1/2 in. apart, then threaded the cord through them as shown. I've made this modification for several friends, using different sizes and lengths of cord. Usually I use a cord that's 16 to 20 in. long."
To read the rest of this story, download this issue below or click
here to register with your account number.
