Satellite Dish Bird Feeder
 ✖  |
When we upgraded our TV satellite dish, we decided to turn the old dish into a bird feeder. We drilled a hole in the center of the dish large enough for a piece of rerod, which sticks down into a pipe in the ground. At the top of the rerod, we welded a large washer into which we drilled four holes to hold chain links. We ran chain down to four holes along the edge of the dish. The top and bottom links of the chain were cut open and then bend out to fit into the holes. The height can be adjusted by moving the clamp. (C.F. Marley, P.O. Box 93, Nokomis, Ill. 62075 ph 217 563-2588)
Click here to download page story appeared in.
Click here to read entire issue
Satellite Dish Bird Feeder FARM HOME recreation 32-2-41 When we upgraded our TV satellite dish, we decided to turn the old dish into a bird feeder. We drilled a hole in the center of the dish large enough for a piece of rerod, which sticks down into a pipe in the ground. At the top of the rerod, we welded a large washer into which we drilled four holes to hold chain links. We ran chain down to four holes along the edge of the dish. The top and bottom links of the chain were cut open and then bend out to fit into the holes. The height can be adjusted by moving the clamp. (C.F. Marley, P.O. Box 93, Nokomis, Ill. 62075 ph 217 563-2588)
To read the rest of this story, download this issue below or click
here to register with your account number.
