«Previous    Next»
"Sub Trigger" Improves Shooting Accuracy
Anyone who uses a rifle or shotgun will be interested in this new"sub trigger" that provides a smoother trigger action than you can get using only your finger, resulting in more accuracy.
  The "E-Z pull trigger-assist" is made from non-corrosive aluminum. It's designed to reduce trigger pull by up to 50 percent.
  The unit bolts onto the trigger guard and has a roller bearing cam built into it that provides compound leverage when you pull on it. When you squeeze the adapter, it touches off against the trigger twice as fast.  "Trigger squeeze is critical to accurate shooting, regardless of the gun type. By slowly and smoothly squeezing the trigger, you won't flinch in anticipation of the recoil or sound of the gun firing," says Mike Revzon, Hoffman's Gun Center, Newington, Ct.
  The adapter is offered in black or clear anodized finishes. It's designed to fit on most single trigger rifles and shotguns. Fits Winchester, Ruger, Remington, Savage, Browning, and other rifles with a trigger guard width of less than .595. Browning A-Bolt, Weatherby, and rifles with a trigger guard between .595 and .630 are available upon request.
  The unit attaches to the trigger guard with four small set screws.
  Sells for $39.95 plus S&H.
  Contact: FARM SHOW Followup, E-Z Hoffman's Gun Center, 2585 Berlin Turnpike, Newington, Ct. 06111 (ph 860 666-8827; ezpulltriggerassist.com; www.ezpulltriggerassist.com).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2007 - Volume #31, Issue #2