1986 - Volume #10, Issue #3, Page #03[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story | Read this issue]
Rolling Root Puller Nails Quack Grass
Wiskel says Roundup is probably least effective in heavy peat soils such as he farms. "Due to the high organic content of the soil, the chemical simply is not as effective as we need," he says.
The machine consists of a 2-ft. dia. steel drum 8 ft. long with 6-in. steel tines poking out of it. The tines mount on a retractable cam inside the drum. The cam extends the tines full length as they go into the ground and retracts them as they come over the top, so that weeds are dropped onto the top of the ground. The pto-driven drum spins at 100 to 300 rpm's and raises and lowers hydraulically to adapt to varying conditions. Wiskel says tines often need to penetrate only 4 in. to do an adequate job.
Before running the root puller through the field he works up the ground with a chisel plow or cultivator. "It'll pull up every kind of weed no matter how much residue is on the ground. After they've been pulled you can either leave them on the surface or rake them into piles to burn," says Wiskel.
The machine is still in testing but Wiskel is optomistic that he can keep root pulling costs to less than $10 per acre and get about 90% of the problem weeds. He hopes to sell a 10-ft. wide model of the machine for around $7,500 (U.S.). He'd like to test the machine in other areas of the U.S. and Canada.
"If we're successful it may cause chemical companies to lower the cost of their chemicals," he notes.
For more information, contact: FARM SHOW Followup, Stan Wiskel, Athabasca, Alberta (ph 403 675-2405).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.