2003 - Volume #27, Issue #1, Page #38[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story | Read this issue]
Old Gas Grill Converted Into Portable Parts Washer
"I started the project by cutting into the barrel until the tops of the railroad irons were just above the top of the barrel and then spot welded the irons in place. Then I put in the rebar, positioned the bolts for the vise, and poured the cement. If I want to lay something big on top of the anvil I can unbolt the vise and take it off. The railroad irons will take all the pounding I can give them without cracking.
"I also converted an old gas grill that didn't work any more into a portable parts washer, by replacing the grill with a 3-gal. electric-operated parts washer. I use the grill's folding front and end sections to hold parts. The nice thing about my parts washer is that I can take it anywhere I want. If I'm working on a tractor on the cement pad in front of my shop I can just roll the parts washer out there and wash parts on the spot. It's amazing how much that helps. It saves hundreds of steps and also eliminates the possibility of dropping parts that I'd otherwise have to carry into my shop. It also avoids making a mess in my shop."
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.