«Previous    Next»
T-Post Straightener Fits Receiver Hitch
Here's a fence post straightener that fits into a pickup receiver hitch.
  Larry Schulze, of Clifton, Texas pinned an 18-in. length of 2-in. square tubing into the pickup hitch. Then Schulze slipped a 3- in. long sliding collar made out of 2 1/2-in. square tubing over the smaller tube and welded a 1/4-in. thick flat plate with a "T" shape cut out of it.
  To use, Schulze simply slides the bottom of the T-post through the "T" slot and pushes down to bend it. The collar slides back and forth as needed.
  Because the tool works better than he expected, he's willing sell them for $25 plus shipping.
  Contact: FARM SHOW Followup, Larry Schulze, 135CR 3250, Clifton, Texas 76634 (ph 254 675-8195; email: schulze @earthlink.net).

  Click here to download page story appeared in.

  Click here to read entire issue

To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2005 - Volume #29, Issue #2