Magneto Coupling For Regular Farmall Tractors
 ✖  |
Marvin Henry, Box 9, Maywood, Neb. 69038 ph 308 362-4251: "I recently started manufacturing a magneto coupling for regular Farmall tractors. This coupling also fits International Harvester 10-20 and 15-30 series tractors and maybe others. These tractors were built from 1924 to about 1932.
"The coupling is about 1 1/4 in. long and goes between the drive mechanism off the engine and the magneto. It has two prongs on one end and two slots on the other end. Over time, both the prongs and the slots get worn bad and then the magneto gets out of time. I've been told that it's hard to find a replacement coupling, and if you do find one it will probably have a lot of wear. It sells for $28 postage paid."
Click here to download page story appeared in.
Click here to read entire issue
Magneto Coupling For Regular Farmall Tractors TRACTORS Accessories 28-3-36 Marvin Henry, Box 9, Maywood, Neb. 69038 ph 308 362-4251: "I recently started manufacturing a magneto coupling for regular Farmall tractors. This coupling also fits International Harvester 10-20 and 15-30 series tractors and maybe others. These tractors were built from 1924 to about 1932.
"The coupling is about 1 1/4 in. long and goes between the drive mechanism off the engine and the magneto. It has two prongs on one end and two slots on the other end. Over time, both the prongs and the slots get worn bad and then the magneto gets out of time. I've been told that it's hard to find a replacement coupling, and if you do find one it will probably have a lot of wear. It sells for $28 postage paid."
To read the rest of this story, download this issue below or click
here to register with your account number.
