G0-Anywhere Vise Fits Pickup Hitch
 ✖  |
Dan Jacobson, Pequot Lakes, Minn., doesn't have a tailgate on back of his pickup. That's because he often uses the pickup bed as a work table in the shop or field. One of his handiest tools is a vise mounted on a bracket that fits into the pickup's 2-in. receiver hitch. The vise is positioned flush with the pickup bed.
The vise bolts to a base made by welding two pieces of heavy angle iron together.
"I can take the vise with me anywhere," says Jacobson. "The same idea could be used with the tailgate only you'd just have to extend the bracket farther back."
Contact: FARM SHOW Followup, Dan Jacobson, Sr., 8913 Weaver Lake Drive, Pequot Lakes, Minn. 56472 (ph 218 543-6623).
Click here to download page story appeared in.
Click here to read entire issue
G0-Anywhere Vise Fits Pickup Hitch PICKUPS Accessories 28-2-37 Dan Jacobson, Pequot Lakes, Minn., doesn't have a tailgate on back of his pickup. That's because he often uses the pickup bed as a work table in the shop or field. One of his handiest tools is a vise mounted on a bracket that fits into the pickup's 2-in. receiver hitch. The vise is positioned flush with the pickup bed.
The vise bolts to a base made by welding two pieces of heavy angle iron together.
"I can take the vise with me anywhere," says Jacobson. "The same idea could be used with the tailgate only you'd just have to extend the bracket farther back."
Contact: FARM SHOW Followup, Dan Jacobson, Sr., 8913 Weaver Lake Drive, Pequot Lakes, Minn. 56472 (ph 218 543-6623).
To read the rest of this story, download this issue below or click
here to register with your account number.
