«Previous    Next»
Sheet Metal Shear Fits Power Drill
Put this new gadget on a power drill and you'll be able to cut through sheet metal, vinyl, steel mesh, ductwork, automotive body panels and thin sheeting.
  The Turbo Shear attaches to standard 3/8-in. or larger drill chucks, and requires a minimum 1,200 rpm's.
  The TurboShear is capable of navigating tight curved patterns and square cuts, according to the company. Blind cuts require only a 1/2-in. starting hole. It'll cut through up to 20 ga. galvanized steel.
  Suggested retail price is $49.95 and it's available from heating and air conditioning wholesalers and also at www.amazon.com.
  Contact: FARM SHOW Followup, Malco Products, Inc., Box 400, Annandale, Minn. 55302 (ph 800 328-3530 or 320 274-8246; fax 800 206-6760 or 320 274-2269; email: custsvcs@malcotools.com); website:
www.turboshear.com).


  Click here to download page story appeared in.


  Click here to read entire issue



To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2003 - Volume #27, Issue #6