He Made His Own Flashlight Holder Out Of PVC Tubing
 ✖  |
I never seem to be able to find a flashlight when I need it. To solve the problem, I made my own flashlight holder out of a short length of 2-in. dia. PVC tubing. The holder mounts on the wall next to the entry way in our home and is designed for a long aluminum flashlight.
I drilled a "clearance hole" on one side of the PVC tubing large enough for a screwdriver to go through, and then drilled a smaller hole on the other side so the tubing could be screwed to the wall. (Steve Spiering, 48594 Hwy. 158, Milbank, S. Dak. 57252 ph 320 568-2246)
Click here to download page story appeared in.
Click here to read entire issue
He Made His Own Flashlight Holder Out Of PVC Tubing FARM SHOP Handy Hints 27-4-42 I never seem to be able to find a flashlight when I need it. To solve the problem, I made my own flashlight holder out of a short length of 2-in. dia. PVC tubing. The holder mounts on the wall next to the entry way in our home and is designed for a long aluminum flashlight.
I drilled a "clearance hole" on one side of the PVC tubing large enough for a screwdriver to go through, and then drilled a smaller hole on the other side so the tubing could be screwed to the wall. (Steve Spiering, 48594 Hwy. 158, Milbank, S. Dak. 57252 ph 320 568-2246)
To read the rest of this story, download this issue below or click
here to register with your account number.
