«Previous    Next»
Portable Work Bench Designed To Hold Six Bench Top Tools
One person can easily move this new portable work bench to any location, even when it's fully loaded with tools.
  The Port-A-Shop is a triangular-shaped, three-legged metal stand that measures 60 in. long, 52 in. wide, and 34 in. high. It can support up to six heavy benchtop tools at a time via drop-in mounting points. The tools plug into a six-outlet electric power strip at the base of the unit.
  It comes with three 5-in. swivel casters so it can be moved in any direction or rotated in place. All three casters can be extended or retracted at the same time with a hand-crank. Because of the three-legged design, the work bench can be used on irregular surfaces with no leveling required. Also, more than one operator can use the Port-A-Shop without any interference between tools, even when working on long stock.
  Unit weighs 110 lbs. and has a weight capacity of 500 lbs. A triangular design allows it to be stored in a corner when not in use.
  It comes with a rust-proof, black powder coat finish.
  Sells for $299 plus $55 S&H.
  Contact: FARM SHOW Followup, AGM Container Controls, Inc., 3526 E. Fort Lowell Rd., Box 40020, Tucson, Arizona 85717 (ph 800 995-5590 or 520 881-2130; fax 520 881-4983; E-mail: portashop@agmcontainer. com; Website: www.port-a-shop.com).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2002 - Volume #26, Issue #1