«Previous    Next»
Handy Way To Mount Tubeless Tires
Bob White, South Euclid, Ohio: "I've got the slickest little trick for mounting tubeless tires. After trying every thing I could think of to get beads to seal, I came up with this idea. It works every time and costs nothing.
  "After slipping the tire onto the rim, I ęsnug' the bead on the side that's opposite the valve stem. You don't have to seal that side. I just fit it snuggly to the rim with a couple pulls.
  "Then I flip the tire over onto some supports. I use a couple pieces of 4 by 4's or a couple tires. The supports hold the sides of the tire as you push down on the rim. It only takes a couple of pounds of force to push the rim down enough to close the bead gap. While I hold the rim down with my left hand, I apply shop air with my right to seat the bead. To make it seat faster, I take the valve stem out to reduce restriction in the air flow. This technique has never failed me and no special tools are required. Takes only about 30 seconds."


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2000 - Volume #24, Issue #3