«Previous    Next»
Hinged Hood Tilts Forward On 1978 Ford F-350 1-Ton Pickup
Nathaniel Regier, Newton, Kan.: "I reworked the hood on my 1978 Ford F-350 1-ton pickup so it tilts forward for easy service. I can stand right beside the engine to work on it. I just grab hold of the original latch on front of the hood and pull it down. My technique works well on Ford F series pickups made from 1971 to 1979 but I think the idea would work well on many models. I cut the hood just in front of the windshield. A pair of chains keep the hood from flipping forward all the way over. The chains have springs on them so when the hood goes up it doesn't stop with a æjar'. I made the hinge out of two rubber supports and mounted them under the grill and above the bumper. The radiator was originally bolted onto a steel housing behind the grill. I had to build a steel frame for the radiator so that it stays with the pickup frame as I raise the hood."


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
1999 - Volume #23, Issue #1