Roll Over Slurry Blade

Roll over slurry blade PICKUPS Miscellaneous 17-6-28 This new two-way "rollover" slurry blade automatically reverses its working position when you change the direction of your tractor or skid steer loader so you can use it in both forward and reverse, says Degelman Mfg., Regina, Sask. The slurry blade can be 3-pt. mounted on a tractor or "quick tached" to most makes and models of skid steer loaders. The 6-ft. wide, 16-in. high blade has two 5 1/2-in. high, 3/4-in. thick rubber strips - one on top and one on the bottom. The blade hinges on a pair of steel arms. To switch from pushing the blade to pulling it, you raise the blade until it swings freely in the air, then change direction and lower the blade onto the floor so that it faces in the opposite direction. The rubber strips flex over uneven surfaces leaving a clean, puddle-free floor without damaging it. Replaceable steel wear skids are used to extend the life of the rubber strips. Sells for $1,400. Contact: FARM SHOW Followup, Degelman, Box 830, 272 Industrial Drive, Regina, Sask., Canada S4P 3B1 (ph 306 543-4447).

To read the rest of this story, download this issue below or click here to register with your account number.