«Previous    Next»
3-pt barbed wire unrolling reel
"I've used this wire unrolling reel to string several hundred feet of fence and it's worked great. The wire has never hung up once and if the fence is in a location where the tractor can't go, you just take the unroller off the tractor and walk with it," says Garry Cottrell, Rose Hill, Va.
He used two 16-in. disc blades to "cradle" the roll of wire. The disc on the left is welded solid to a length of 2-in. dia. pipe. The disc on the right is welded to a 6-in. length of 2 1/2 in. dia. pipe that slides on and off the 2-in. pipe and is held in place with set screws. Drawbar pins on either end of the wire reel allow it to mount in place of the tractor drawbar on the 3-pt. arms.
Contact: FARM SHOW Followup, Gary Cottrell, Rt. 1, Box 661, Rose Hill, Va. 24281 (ph 703 445-5569).

  Click here to download page story appeared in.

  Click here to read entire issue

To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
1991 - Volume #15, Issue #6