«Previous    Next»
Split Shear Silage Grab
You can feed silage in various width alleys with this new "split shear" grab from Ireland.
Wylie Engineering's grab splits the block of silage in two, leaving over 2 ft. of clearance in the center and eliminating the need to fork silage to one side or the other. For use in extra wide alleys, an optional solenoid valve can be fitted so that half the grab opens fully before the other, allowing the tractor to be angled to either side for unloading.
Attaches to any loader with bolt-on brackets.
Comes in two sizes: 1,100 lb. capacity, overall width closed 56 in., overall width open 83 in., powered by two 3 1/2-in. bore cylinders; 1,500 lb. capacity, overall width closed 72 in., overall width open 99 in., powered by four 3-in. bore cylinders.
Sells for about $3,900 and $4,650 respectively.
The company also makes a full line of other forage harvesting and handling equipment.
It's looking for a North American distributor for its products.
Contact: FARM SHOW Followup, Wylie Engineering, 97 Moy Road, Dungannon, Co. Tyrone, Ireland, BT71 7DX (ph 44 1868-784420; fax 784761; mobile 44 589-863787).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
1998 - Volume #22, Issue #1