«Previous    Next»
Kit Converts ATV Into Snowmobile
You can convert any ATV into a tracked snowmobile with a new conversion kit from Arctic Trax, Loon Lake, Wash.
  Kits are available for both 2-WD and 4-WD machines. The 2-WD kit puts tracks on back and skis up front. The 4-WD kit puts tracks on all four wheels.
  The 26-in. long, 12-in. wide tracks are made from high density rubber and mount on a lightweight aluminum alloy chassis. They're designed to simply bolt on in place of the wheels.
  "It's amazing how much traction and versatility they add to your ATV," says Doyle Knight. "As far as I know, it's the only kit for ATV's that lets you mount tracks all the way around. With tracks on all four wheels, you won't get stuck. I've tested the tracks and skis for many years. With four tracks on my Kawasaki 4-wheeler I can drive in snow as high as the gas tank with no problem. Another advantage is that if you ever do get stuck, you can simply back up and then go forward again. You can't back up with a snowmobile.
  "The kits will fit any ATV, even the Kawasaki Mule. Everything you need comes fully assembled, ready to bolt on and go. It takes only about 30 minutes to install the complete package.
  "The bottom part of the tracks is supported by a ęslider bar' that results in a smooth ride and puts downpressure on the belt for maximum traction in snow. However, if you're going to run the machine a lot in mud and want to reduce wear on the slider bar, you can remove it and install a set of bogie wheels."
  The kit for 2-WD models, which includes two skis and two tracks, sells for $2,395 plus S&H; the one for 4-WD models, which includes two skis and four tracks, sells for $4,495 plus S&H.
  Contact: FARM SHOW Followup, Arctic Trax, Inc., Box 685, Loon Lake, Wash. 99148 (ph 509 233-8247).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2001 - Volume #25, Issue #6