1999 - Volume #23, Issue #3, Page #38
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Solution To Blown Gasket On MCV Control Valve On The PTO Clutch Pack On 464 Internaional Tractor
David Lee, Grand Junction, Mich.: "I had a blown gasket on the MCV control valve on the pto clutch pack on a 464 International tractor. I kept the problem from recurring by using a heavier 5/16-in. thick plate rather than the origianl 1/4-in. thick plate. This keeps the plate from flexing and blowing under pressure again. This fix would also work on 674, 684, 484, and 574 tractors, and probably other tractors in that series."I always keep mineral spirits in a backpack sprayer to use to wash off engines and other greasy equipment as needed. Here's another tip: In winter, I keep my pressure washer in a small cooler with a light bulb burning inside so it won't freeze."
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.
