«Previous    Next»
I Built A Carrier For A 50-Gal. Drum That Connects To The Trailer
I built a carrier for a 50-gal. drum that connects to the trailer ball on my ATV. It’s a salvaged folding tractor seat support. I mounted an old 1 7/8-in. ball hitch to it and ran 3/4 by 1-in. angle irons from the rear corners of the carrier to the rear rack on the ATV.
    When I want to use it for watering, I use a ratchet strap to hold the drum in place on the carrier. I have a short length of garden hose and one of 3/8-in. tubing plumbed into the bottom of the drum.
    To fill it, I just drive over to the rainwater barrels. I have an electric pump on one and a pitcher pump on the other. I can pump the barrel full and then water the plants.
    If I want to trickle water on, I lay the tubing down and let it gravity flow to the plants. If I want more flow, I use the garden hose or lay down both and let the water run.
    The carrier is also handy for carrying other tools and supplies. If I don’t need it, it’s easy to remove. (John Krueger, Blanchard, Okla.)



  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2024 - Volume #48, Issue #3