«Previous    Next»
Sewer Pipe Makes Inexpensive Replacement PTO Shield
“The pto shield on my bush hog wore out, and a new one would have cost several hundred dollars. Instead, I used a piece of 4-in. dia. sewer pipe to make an inexpensive replacement. I cut off a length of pipe and drilled 2 holes into it. Then I slipped the pipe over the pto shaft and wired the pipe to the lower lift arms on my tractor’s 3-pt. hitch, in order to keep the shield from turning. To grease the pto shaft’s universal joints, I just loosen the wire and move the shield either forward or backward.”




  Click here to download page story appeared in.



  Click here to read entire issue




Order the Issue Containing This Story
2015 - Volume #39, Issue #2