Bolt-On Auger Kit For Case IH Specialty Rotors

Bolt-On Auger Kit For Case IH Specialty Rotors AUGERS Augers (29B) 28-1-29 A new "auger front conversion kit" for Case IH specialty rotors increases combine capacity and efficiency on all crops in tough conditions. The kit fits all existing Case-IH specialty rotors and is easily installed by bolting it on. There's no welding or cutting required. Because the conversion improves feeding into the rotor, you can expect better performance from your combine in tough, viney conditions, says Stewart Steel, manufacturer. The auger front takes away feederhouse rumble in tough crop conditions. Parts in the kit are replaceable, and combines outfitted with the conversion should show a power increase and improved fuel economy. Stewart Steel rebuilds specialty rotors with new rub bars, new/rebuilt impeller blades, new wear bars (or the new auger front conversion kit), your front shaft inspected and changed as required, new rear drive bushings, safety retaining ring, and high speed dynamic balancing. Prices are as follows: standard specialty rotor - $4,250 (Can.) with rotor exchange, or $6,000 (Can.) with auger front conversion kit and rotor exchange. Shipping is extra. The auger front conversion kit sells alone for $1,795 (Can.) plus S&H. Contact: FARM SHOW Followup, Stewart Steel Inc., Box 1087, Weyburn, Sask., Canada S4H 2L3 (ph 306 842-4411; fax 306 848-3519; email: Info@stewartsteel.com; website: www.stewartsteel.com).

To read the rest of this story, download this issue below or click here to register with your account number.